In contract manufacturing, the party answerable under the law for a cosmetic product is the brand owner who places it on the market under its own name or trademark; the contract manufacturer carries out some or all of the production on its behalf. Türkiye's Regulation on Cosmetic Products defines the manufacturer as the person who has a product made and places it on the market under its own trademark, and treats a manufacturer established in Türkiye as the responsible person. The brand owner therefore answers for everything from the product information file and the safety report to each batch reaching the market in compliance. For that, the contract, retained samples, batch records and, where needed, measurement must work together.
Who is the responsible person in contract manufacturing?
This article is not legal advice; for a specific case, check the current text of the regulation and the TİTCK guidelines.
Under Article 4 of the regulation, the manufacturer is the person who manufactures a cosmetic product, or has it designed or manufactured, and places it on the market under its own name or trademark. The Cosmetic Good Manufacturing Practices Guideline (KDD-KLVZ-01) of the Turkish Medicines and Medical Devices Agency (TİTCK) likewise defines the contract manufacturer as the producer that takes on some or all of the production operations on that person's behalf.
Article 6 of the regulation determines the responsible person:
| Situation | Responsible person |
|---|---|
| Product made in Türkiye, manufacturer established in Türkiye | The manufacturer (in contract manufacturing, the brand owner) |
| Product made in Türkiye, manufacturer established abroad | A person established in Türkiye appointed by written mandate |
| Imported product | The importer, or a person established in Türkiye it appoints by written mandate |
| Distributor places the product on the market under its own name or trademark | The distributor |
| Distributor modifies the product in a way that may affect compliance | The distributor |
The last two rows matter for private-label sales. A distributor selling a ready-made product under its own brand becomes legally responsible on the same basis as the manufacturer. Merely translating the product information, however, does not count as a modification affecting compliance.
Article 4 of the EU's Regulation (EC) No 1223/2009 on cosmetic products sets up the same framework, and uses the same terms to make a distributor the responsible person when it places a product on the market under its own name or modifies it.
Which obligations can the responsible person not hand to the contract manufacturer?
Outsourcing production does not outsource the obligations. Under the regulation, these remain with the responsible person:
- Responsible technical person (Article 7): The responsible person employs a responsible technical person who checks that the product to be placed on the market complies with cosmetics legislation and good manufacturing practice.
- Safety report (Article 13): Prepared before the product is placed on the market and kept up to date in light of information obtained afterwards.
- Product information file (Article 14): Contains a description of the manufacturing method and a statement of compliance with good manufacturing practice; kept for ten years after the last batch is placed on the market. We covered its contents in detail in what is a cosmetic product information file.
- Notification (Article 16): The product is notified through the national electronic database before it is placed on the market; if any of the information changes, it is updated without delay.
- Corrective action (Article 8): If the product is considered not to comply, the responsible person immediately takes the measures needed to bring it into conformity, withdraw it or recall it, and informs the Agency immediately where there is a risk to human health.
- Supply chain record (Article 10): At the Agency's request, the responsible person reports which distributors received a batch, for three years from the date the batch was made available to the distributor.
What should the contract manufacturing agreement say?
Section 14 of the GMP guideline sets four rules for contract services: a written contract is drawn up for every contract operation and guarantees a service that meets predefined acceptance criteria; the parties' regulatory responsibilities are stated clearly in the contract; the contract is signed and dated by both parties and kept by both; and if the service continues after the contract expires, the contract is updated.
The guideline does not list the clauses one by one. Read together with its other sections, these are the questions the contract should answer explicitly:
- Who sources the raw materials, who approves the suppliers and who carries out raw material intake checks?
- Who decides on release of the finished product?
- Who keeps the retained samples and raw material samples, and where?
- How, and how far in advance, are changes to the formula, the raw material supplier or the production method notified?
- In a complaint or recall, within what time are records shared?
- May the brand owner audit the site?
What should the brand owner see for every batch?
The following provisions of the guideline show what evidence should stand behind a batch:
| Evidence | Guideline clause |
|---|---|
| The finished product was released with quality control approval | 11.4.1 |
| A fully packed retained sample from each batch is kept until at least one year after the expiry date | 12.4.1 |
| Starting material samples are kept for at least two years from release of the product | 12.4.2 |
| Sample containers carry the batch number and sampling date | 12.2.4 |
| Distribution records are accessible to those responsible for recalls | 15.3.3 |
This evidence sits in the contract manufacturer's records. If the brand owner's access to it is not secured by contract, answering a question at inspection depends on the contract manufacturer's goodwill.
Documents do not answer every question on their own. The product information file describes the formula; whether the batch on the shelf matches it is shown not by the record but by measurement. When the same product is made at different sites or with raw materials from different suppliers, the file can stay the same while the product changes. Defining an approved batch as a reference and comparing later batches against it therefore leaves the brand owner with evidence independent of the contract manufacturer.
What happens if a batch has a problem?
Clause 15.2.3 of the guideline requires that when a product defect is found in one batch, other batches are checked to see whether they are affected. In a recall, every stage is recorded with the batch number, and a final report is prepared showing the difference between the quantity distributed and the quantity recovered (15.3.5). Where consumer health may be affected, the Agency is informed immediately (15.2.5, 15.3.7).
How fast these steps go depends on how quickly you can find which raw materials a batch was made with and where it went. If the record does not reach from filling back to the raw material supplier, the scope of a recall has to be wider than necessary. We described how to build the batch record in a batch number is not a batch identity.
Is the contract manufacturer's GMP certificate enough?
Under clause 6.1.3 of the GMP guideline, TİTCK issues a Cosmetic Good Manufacturing Practices Certificate to production sites registered with the Agency that it finds compliant in an inspection carried out on their application, and those sites are exempt from planned inspections for the life of the certificate. The certificate is a strong indicator of the site's system, but it does not show that individual batches meet your formula and acceptance criteria. The certificate does not remove the brand owner's responsibility.
Frequently asked questions
Who prepares the product information file in contract manufacturing? The responsible person is accountable for the file; in contract manufacturing, that is the brand owner placing the product on the market under its own brand. The contract manufacturer supplies data for sections such as the manufacturing method and GMP information; how and when that data is shared should be written into the contract.
I sell a ready-made product under my own brand. Am I the responsible person? Under Article 6 of the regulation, if you place the product on the market under your own name or trademark, you are the responsible person and are legally responsible on the same basis as the manufacturer.
Can the contract manufacturer keep the retained samples? The guideline requires a retained sample from every batch; where it is kept is for the parties to agree in the contract. The brand owner's access to that sample, and where needed its right to hold part of it, should be written into the contract explicitly.
What if the contract manufacturer changes a raw material supplier? A change of supplier can change the impurity profile and the product's properties. Because the safety report must be kept up to date with new information, advance notice of such changes should be in the contract.
What does Kozvex provide in contract manufacturing?
In Kozvex, an approved batch is defined as the reference and later batches are compared against it. Because the reference belongs to your product, the product is assessed against the same measure whichever site makes it. Scanning is done with the handheld device and the mobile app; where a decision is needed, the sample is sent to a contracted accredited laboratory and the report is kept in the batch record. The record does not replace the responsible person's obligations, the safety assessment or the contract manufacturing agreement. Detail is on the how we work and skincare pages.
Sources
- Regulation on Cosmetic Products, Official Gazette, 8 May 2023, No. 32184 (Repeated) (in Turkish)
- TİTCK, Cosmetic Good Manufacturing Practices Guideline, KDD-KLVZ-01, Revision 2 (11.09.2026) (in Turkish)
- TİTCK, About the Updated Guideline (18.09.2026) (in Turkish)
- Regulation (EC) No 1223/2009 on cosmetic products


